AC Power Supplies
• Output Rating: AC 0 – 400 Vrms, DC 0 - ± 570 V
• Output Frequency up to 999.9 Hz (ASR-3400HF up to 5000Hz)
• DC Output (100% of Rated Power)
View PDF• Low Ripple & Noise
• Measurement and test functions include VOLT、CURR、PWR、SVA、IPK、IPKH、FREQ、PF、CF
• 1Output capacity : APS-7050(500VA、310Vrms、4.2Arms);APS-7100 (1000VA、310Vrms、8.4Arms)
View PDF• Output Capacity: APS-7050E(500VA, 310Vrms, 4.2/ 2.1Arms), APS-7100E(1000VA, 310Vrms, 8.4/ 4.2Arms)
• Only 88mm(2U) case height
• Measurement function comprises Voltage, Current, Power, Current(peak), Frequency, Power Factor
View PDFProgrammable DC Power Supplies (Single Channel)
• Programming resolution: 1mV/ 0.2mA (GPP-3610H); 2mV/0.2mA (GPP-7250)
• Readback resolution: 0.1mV/ 0.1mA
• Low ripple noise: ≦ 1mVrms / ≦2mArms
• Load function (CC, CV, CR mode)
View PDF• Supports Setting Value, Measurement Value and Output Waveform Display
• Load Function (CC, CV, CR Mode)
• Low Ripple Noise: ≦350uVrms/ ≦2mArms
• Setting Resolution: 1mV / 0.1mA; Read Back Resolution: 0.1mV / 0.1mA
View PDF• Voltage Rating: 6V/8V/12.5V/15V/20V/30V/40V/50V/60V
• Output Power Rating: 1200W~1560W
• C.V / C.C Priority
• Adjustable voltage/current rise and fall time
View PDF
DC Power Supplies (Multi Channel)
• Voltage Rating: 30V/40V/80V/160V/250V/800V, Output Power Rating: 360W ~ 1080W
• Multi-range Voltage & Current Combinations in One Power Supply
• Adjustable Slew Rate
• CV/CC Priority; Particularly Suitable for the Battery and LED Industry
View PDF• Voltage/current/power settings
• OVL / OCL /OPL /OTP protection
• Output on/off control
• 3-step fan speed control
• Voltage/current/power settings
View PDF• Standard interface : RS-232C
• Wide input voltage range and high power factor (P.F)
• high efficiency and high power density
• Constant voltage and constant current operation
View PDF• CC/CV priority mode selection is ideal for battery and LED industries
• Multi-channel: maximum 720W for dual-channel models and maximum 1080W for triple-channel models; output latency between channels with the same voltage model is less than 0.1ms
View PDF• Load function (CC, CV, CR mode)
• Setting resolution: 1mV / 0.1mA; read back resolution: 0.1mV / 0.1mA
• Low ripple noise: ≦1mVrms/ ≦2mArms
• Transient response time: ≦100µS
View PDF• Low Ripple Noise: ≦350uVrms/ ≦2mArms
• Setting Resolution: 1mV / 0.1mA; Read Back Resolution: 0.1mV / 0.1mA
• Supports Setting Value, Measurement Value and Output Waveform Display
• Load Function (CC, CV, CR Mode)
View PDF• 2/3/4 Independent Isolated Output
• 4 LED Display Sets: 3 digits after decimal point
• Minimum Resolution :
• Key-Lock
View PDFNon Programmable DC Power Supplies (Single Channel)
• 1 Independent Isolated Output
• Output ON/OFF
• Analog Control (Remote I/O) for Output ON / OFF
• Setting & Read back Resolution 100mV / 10mA (*1)
View PDF• Dual Measurement Display
• High Efficiency
• 0.01 % High Regulation
• Constant Voltage and Constant Current Operation
View PDFNon Programmable DC Power Supplies (Multi Channel)
• 2 / 3 / 4 Independent Isolated Output
• Setting & Read back Resolution 100mV / 10mA (*1)
• Analog Control (Remote I/O) for Output ON / OFF
View PDF• Three independent, isolated output
• CH3 adjustable output : 0.1~5V/3A
• High efficiency power conversion (up to 25% more than traditional power supply)
View PDF